Phone: (516) 626-7535

POLYTECH ENGINEERING P.C.

ENGINEERING A SUSTAINABLE FUTURE


What is new at Polytech?

With ever changing client needs, economic climate, technology and global issues, Polytech is ever ready to provide economically viable and technically feasible solutions to the our clients. The following lists some of the notable projects that are at various stages:

Top Stories

  • CNG Fueling Stations Design
    Polytech has been retained by a confidential client to design and assist in construction its compressed natural gas (CNG) Fueling stations in North America as well as overseas. These CNG stations will be open to the public for fueling passenger and commercial vehicles.
  • PV Solar System Design
    Polytech has been retained by a confidential client to design and assist in construction its photovoltaic solar power generation stations. The various PV power stations will generate power from 25 KW to 5 MW. Utility grid tie-ins will be at 240VAC single phase thru 69 kV three phase transmission lines.
  • Natural Gas fired Power Generation -CHP
  • Polytech is negotiating a 15 MW design/build combined heat and power (CHP)natural Gas fired power station with a prospective client. Project will be built in association with a large construction firm. Projected savings in energy and demand charges, coupled with heat energy to be used for heating, air-conditioning and refrigeration, will amortize the capital cost if few years.
  • Liquid Natural Gas stations (LNG)
    Polytech has entered into an R & D program with a confidential client to develop skid mounted LNG conversion stations. These stations will be used to collect, scrub, clean, liquefy and store natural gas in liquid form (LNG) thus reducing the volume to approx 1/600 of natural gas at STP. These skids will be used to collect and pump LNG to over the road tankers to transport LNG from remote Natural Gas wells where no Gas pipelines exist.
  • Power from wood waste
    Polytech has entered into a wood waste recycling program with a confidential client to engineer, build and commission a wood chip processing pilot plant through the producer gas route. The wood waste will be converted to produce gas that will run a spark ignited engine generator. Polytech will engineer a CHP system where power will be tied to the utility grid and generated heat energy will be used for HVAC and process application.

 

 

 

Press Releases

  • CNG Fueling Stations Design
  • PV Solar System Design
  • Natural Gas fired Power Generation -CHP
  • Liquid Natural Gas stations (LNG)
  • Power from wood waste